The 2210 DU can be remotely mounted, connected by a 4-wire cable, or factory mounted at the TankRadar Pro’s enclosure. If remotely mounted, up to six PT 100 elements can be connected to the optional temperature measurement card in the 2210 DU.
TankRadar Pro is fully configurable from the 2210 DU. User-friendly menus and an installation wizard will guide through the complete start-up procedure.
All measured and calculated values such as level, spot temperature, volume, signal strength etc are displayed as numeric values or shown as bargraphs. A user-defined window can be set up by the operator.
Technical Data
Viewing data:
Level, ullage, spot temperature, volume, level rate, and signal strength.
Display type:
Graphic LCD display, 128x64 pixels.
Ambient temperature:
-20ºC to +55ºC (-4ºF to +130ºF).
Hazardous locations certifications:
ATEX: II 2 G, EEx ib IIC T4 (display without temp. inputs).
FM: Intrinsically safe, Class 1, Div 1, Group A,B,C,D.
Max cable length:
100 m (328 ft).
Housing material:
Die cast aluminium.
Dimensions (width x height x depth):
150x120x70 mm (6x4x3 inch).
Weight:
1.2 kg (2.6 lbs).
Cable entry:
2xM20, cable diameter 7-14 mm (specified in order),
1xM25, cable diameter 9-18 mm (specified in order).
Optional:
1/2-inch and 3/4-inch NPT by external adapters.
Ingress protection:
IP 67, NEMA 4.
2210 DU with temperature input option:
Measuring range:
-50ºC to +250°C (-58ºF to +480ºF).
Number of elements:
3x3-wire PT 100 spot or 6 PT 100 spot with common return.
Ex Class:
ATEX: II 2(1) G EEx ib[ia] IIC T4 (display with temp. inputs).
Ambient temperature:
-40ºC to +70°C (-40ºF to +158ºF).
Accuracy:
± 0.5°C.
Resolution:
0.1°C.